表面接觸皿NA
表面接觸皿（NA）使用說明書?，日水生物
所屬分類：
一次性平皿接觸碟
產品編號：
30134
產品用途：
產品規格：
保質期/天：
培養基公司報價QQ：
1772901588
微生物培養基公司銷售部：
15376702184
培養基生產廠家：
青島日水生物
關鍵詞：
NA表面接觸皿碟生產廠家
表面接觸皿使用方法
表面接觸皿平板成分
客戶留言
產品描述
表面接觸皿（NA）使用說明書
產品編號：30134
產品名稱：表面接觸皿（NA）
英文名稱：Nutrient A克ar
包裝規格：內容物15~20毫升，55mm×10個/包，三層真空包裝
產品用途：用于設備、車間、人員、包裝材料等表面微生物的測定
組成成分：蛋白胨10克；牛肉浸粉3克；氯化鈉5克；瓊脂15克；蒸餾水1000毫升、pH7.3±0.1
貯藏條件：225℃避光保存
有效期限：180天
使用方法：
1、從冷藏柜中取出接觸皿，并恢復至室溫。
2、將包裝整體送入取樣地點，在此過程中逐步去掉外面兩層包裝，最后一層真空包裝在操作間打開。
3、打開接觸皿上蓋，使培養基充分接觸待測表面，必要使用手指輕輕按壓接觸皿底部中心約10秒，輕輕抬起，將上蓋從接觸皿一側小心蓋上。
4、在接觸皿磨砂區域標記取樣地點、取樣時間和取樣人。
5、用消毒劑或殺孢子劑擦拭測試區域，以消除培養基的殘留。
6、將接觸皿從潔凈室取出，按規定的溫度和時間倒置培養。
7、觀察、計數。
產品性能指標：
1、外觀：淡黃色、培養基凸出接觸皿邊緣適當高度、表面平整、無裂痕、無肉眼可見雜質和氣泡。
2、理化：pH合格，凝膠強度500650克/cm2。
3、無菌性和持水性：3035℃，培養5天，無細菌生長，培養基無明顯失水現象。
4、生長試驗：接種大腸埃希氏菌ATCC25922、銅綠假單胞菌ATCC27853、枯草芽孢桿菌ATCC 9372、金黃色葡萄球菌ATCC25923、白色念珠菌CMCC(F)98001、黑曲霉CMCC(F)98003分別50100CFU，生長良好且菌落直徑和菌落特征典型。
注意事項：
1、本品經高壓滅菌、無菌灌裝及輻照滅菌，若使用前接觸皿已經干裂或染菌，請勿使用。
2、開封后未使用完的接觸皿需及時密封并至于冷藏柜中保存，避免干裂和染菌。
3、在冰箱中儲存時間過久或溫差較大的情況下，接觸皿會出現部分冷凝水，若較多請在潔凈環境下將水傾出，并于培養箱中放置一段時間，待其表面干燥后再使用。
4、本品為一次性使用產品，使用后應高壓滅菌后丟棄。
5、僅用于工作區域表面微生物檢測。
6、本品僅限中國大陸銷售。
Usage:
1. Take out the contact dish from the refrigerator and bring it to room temperature.
2. Send the whole package to the sampling site, and gradually remove the outer two layers of packaging in this process. The last layer of vacuum packaging is opened in the operation room.
3. Open the top cover of the contact dish so that the medium can fully touch the surface to be measured. It is necessary to gently press the bottom center of the contact dish with your finger for about 10 seconds, gently lift the top cover and cover it carefully from one side of the contact dish.
4. Mark the sampling place, sampling time and sampling person in the contact dish scrub area.
5. Wipe the test area with disinfectant or sporicide to eliminate the residue of the culture medium.
6. Remove the contact dishes from the clean room and culture them upside down at specified temperature and time.
7. Observation and counting.
Product performance Indicators:
1. Appearance: light yellow, medium protruding contact dish edge with appropriate height, smooth surface, no cracks, no visible impurities and bubbles.
2. Physicochemical: pH qualified, gel strength 500650 g /cm2.
3. Sterility and water holding capacity: 3035℃, culture for 5 days, no bacterial growth, no obvious water loss in the medium.
4. Growth test: Inoculated with Escherichia coli ATCC25922, Pseudomonas aeruginosa ATCC27853, Bacillus subtillariae ATCC 9372, Staphylococcus aureus ATCC25923, Candida albicans CMCC(F)98001, aspergillus Niger CMCC(F)98003, 50100CFU, respectively, with good growth and typical colony diameter and colony characteristics.
Notes:
1. This product is sterilized by high-pressure, aseptic filling and irradiation. Do not use it if the contact dish has been cracked or infected with bacteria before use.
2. Contact dishes that have not been used up after opening shall be sealed in time and stored in the refrigerator to avoid cracking and contamination.
3. If the storage time in the refrigerator is too long or the temperature difference is large, part of condensed water will appear in the contact dish. If there are more, please pour out the water in a clean environment and place it in the incubator for a period of time.
4. This product is disposable and should be discarded after autoclave.
5. It is only used for microbial detection on the surface of the working area.
6. This product is only sold in mainland China.
